Module Release Agent
RHEORELEASE – SPL MR-164
RHEORELEASE – XL MR-165
RHEORELEASE – SPL MR-164
Ready to use Chemical Shutter-Release Agent
Advantages
- Ready to use
- Non-staining concrete surfaces
- Fast and easy-strapping
- Suitable For all types of form works/moulds
- Increases life of form work
- Reduces concrete contamination
- Gives fair-faced concrete finish
- Economical and easy to use
- Cost-effective for storage and transportation.
Product
RHEOBOND- SBR is a styrene emulsion polymer bonding agent for cementitious systems.
Composition
RHEORELEASE-SPL is a mixing of special chemicals & minerals having good release properties for any type of formwork.
Purpose
To achieve fair faced concrete
Usage
30 to 50m7liter is possible depending upon the porosity and texture of surface. Ensure good ventilation and do not smoke during use. flash point 60°C Packing 1, 5, 10, 50,100 Ltr. drum
Description
RHEORELEASE-SPL is a mixing of mineral oil and special chemical with good shutter release property without staining on concrete.
Properties
- Suitable for use with steam cured concrete
- Its effective on both wood & metal shutter & mould
- Can be used safely with white cement because of non staining property.
Formwork surfaces
RHEORELEASE-SPL may be used on Wooden or metal surfaces. Particularly effective on resinous coated surfaces. RHEORELEASE-SPL can be used safely with white cement. RHEORELEASE-SPL is an internationally used material and has an outstanding record of performance.
Technical Data
Form: Liquid
Colour: Pale straw
SP Gravity: 0.83s0.02 at 30°C
Method of use
No preparation is necessary but if extensive reuse of timber mould. It is advisable to protect all new surface with RHEORELEASE-SPL. For used mould all excess cement must be removed together with any surface deposits of previous oil. RHEORELEASE-SPL should be applied by brush sponge or mould oil sprayer. If a sprayer is used, care should be token to choose correct size of sprayer. Apply one thin coat on entire surface thinnest coating necessary to achieve effective coverage. Excessive application may lead to surface dusting and uneconomical too. Wipe or brush of any excess particles on the surface and apply one coat of RHEORELEASE-SPL before to remove. RHEORELEASE-SPL completely for retooling mould or shutter surface. Use strong industrial detergent together with stiff brushing then thoroughly rinse with water.
Storage Life
RHEORELEASE-SPL has a storage life of one year and should be stored in manufacturers sealed container in frost free condition out of direct sunlight.
Health & Safety
RHEORELEASE-SPL is not a health hazard. Use gloves when handling. Remove splashes on the skin with soap & water avoid contact with eyes and accident contamination should be washed thoroughly with plenty of water and seek medical treatment.
RHEORELEASE – SPL MR-164
RHEORELEASE – XL MR-165
RHEORELEASE – XL MR-165
Emulsified Modified Release Agent
Advantage
- Non-staining concrete surface
- Fast and easy-strapping
- Suitable for all types of form work/moulds
- Increases life of form work
- Reduces concrete contamination
- Gives fair-faced concrete finish
- Requires water for dilution
- Economical and easy to use
- Cost-effective for storage and transportation
Product
RHEORELEASE-XL is a concentrated emulsified chemical mould, release oily liquid.
Composition
RHEORELEASE-XL is pale amber liquid carefully blended combination of refined emulsified mineral oil and chemical release agents.
Purpose
RHEORELEASE-XL is used for easy-stain free release of concrete moulds and formwork of all types.
Coverage
RHEORELEASE-XL gives coverage of 18 to 20m2 per liter when diluted with water depending on the surface texture and porosity of the form work.
Packing
5, 50, 100, 21011r. Drums.
Description
RHEORELEASE-XL is a concentrated emulsified chemical formwork / mould release agent based on mineral oils, when mixed with water at 1:5 dilution, it produces a thin film of stable release agent.
Properties
RHEORELEASE-XL has an outstanding releasing properties and advantages over conventional oil. It may react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stropping from the hardened concrete.
Formwork Surface
- RHEORELEASE-XL may be used on metal surfaces, particularly effective on resinous coated surfaces.
- RHEORELEASE-XL can be used safely with white cement. RHEORELEASE-XL is an internationally used material and has an outstanding record of performance.
Technical Data
Form: Liquid
Colour: Pale Amber
SP. Graphs: 0.85 kg/liter at 27°C
Dilution Rate: 1:5 with water
Method of use
Mixing:
First dilute RHEORELEASE-XL in the proportion of 1 liter lo 5 litre of water using a clean container on Stirring thoroughly until evenly mixed. If the solution is not used on the same day it should be stirred again before use. Apply the solution to the face of the formwork by spray brush or cloth, only one coat should be applied ( as thinly as possible) and Glow to dry. If the formwork is not used for several days then only a further coat may be applied.
Storage
RHEORELEASE-XL has a shelf life of 1 year if stored under 50°c in unopened condition. Diluted product should be used within 5 days.
Handing Precautions
RHEORELEASE-XL is an industrial chemicals and inflammable. Proper care should betaken rubber gloves and goggles should used. Skin contact should be avoided.