Concrete Curing Compound
RHEOCURE – WB CC-161
RHEOCURE – RB CC-162
RHEOCURE – WB CC-161
Wax Based Concrete Curing Compound Advantages
Advantages
- Give water repellent film.
- Allows continuous and gradual curing without constant attention.
- Reduces surface temperature and crack formation.
- Prevents early water evaporation from concrete.
- No risk of poor curing.
- Eliminates use of water curing, hessian or sand.
- Non-toxic, Non- Flammable.
- Economical and easy to use.
- Reflects more ultraviolet rays.
- Facilitates the production of uniform concrete of maximum strength and durability
Product
RHEOCURE-W8 is wax based concrete curing compound for fresh concrete, screeds, floors, gronolithic toppings and vertical surfaces complies to ASTM-C-309-74.
Composition
RHEOCURE-W8 is a white liquid based on low viscosity synthetic wax emulsion and white pigments.
Purpose
To protect concrete against excessive drying out by retaining the moisture and water in fresh concrete. To prevent permanent water loss from concrete.
Coverage
RHEOCURE-W8 has a coverage of 4 to 5 m’/liter.
Packing
50,100,210 liters drums
Description
RHEOCURE – WB is a solution of special pigmented wax emulsion formulated for application to freshly -placed concrete. It dries to form impervious film on the surface. It ensures that the concrete Keeps as moist as possible during the vital curing period. Efficient curing is particularly important in exposed situations such as concrete roads and runways etc. where the surfaces are subject to the drying action of heat, direct sunlight or wind. Traditional curing methods using wet Hessian, straw, sand or polythene sheeting are never completely efficient as it is possible to exclude air entirely from the face of the concrete. These techniques waste time, labour and materials and in addition are difficult to apply to vertical surface. RHEOCURE – WB curing compound membrane replaces these older methods, by virtue of its easy application, higher efficiency and saving in labour and material costs.
Where to use
For efficient and positive curing of canal lining, roads, runways, external floors, bridges, column and beams, dams other types of concrete construction Where water curing difficult or unreliable.
Technical Data
Form: White Liquid
Sp. gravity: 0.98
dry film: translucent
application temp: min 5°C
Method of use
RHEOCURE – WB should be applied at the rate of 1 liter to 5.5m2 of surface area, a single spray-applied coot is sufficient. For horizontal surfaces spray on RHEOCURE – WB as soon as any excess water has dried off. This is usually within 30 minutes of finishing vertical surface should be welted with water after stripping the shuttering and just prior to the application of RHEOCURE-WB.
Storage Life
RHEOCURE – WB has a shelf life of at least 12 months in unopened drums, protect from direct sunlight.
Handling Precaution
RHEOCURE – WB is water based non-hazardous, non-toxic. Avoid contact with skin and eyes.
RHEOCURE – WB CC-161
RHEOCURE – RB CC-162
RHEOCURE – RB CC-162
Resin Based Concrete Curing Compound
Advantage
- Highly efficient curing
- Reduces Supervision labour cost
- Curing efficiently more than 90%
- Forms an elastic impervious film to retain maximum moisture cement during curing period
- Allows gradual and continuous curing without constant attention
- Simple one coot spray application
- Reduces possibility of shrinkage hairline cracking and crazing
- Ready mixed and economical
Product
RHEOCURE – RB is highly effective curing compound for concrete
Composition
RHEOCURE – RB is aluminised coloured solution of selected resins
Purpose
To protect concrete against excessive drying out during curing To achieve optimum strength and durability.
Packing
20, 50, 1000, 210 ltrs HDPE Drums
Effective Curing
RHEOCURE – RB allows continuous and gradual curing without constant attention thus reduced supervision and labour costs over conventional methods. It also facilitates the product of uniform concrete of increased resistance to abrasion.
Description
RHEOCURE-RB is a solution of special resin, formulated for application to freshly- placed concrete. RHEOCURE – RB dries to form an elastic impervious film on the surface which ensures that the concrete remains as moist as possible during the vital curing period. The film gradually disintegrates on weathering. Traditional curing methods using wet hessian, straw sand or polythene sheeting are never completely efficient as it is impossible to exclude air entirely from the face of the concrete. These techniques waste time, labour and materials and in addition are difficult to apply to vertical surfaces. RHEOCURE – RB membrane curing compound replaces these older methods by virtue of its ease of application, higher efficiency and savings in labour and material costs.
Where to use
For Efficient and positive curing of
- Bridges, dams, airport runways, reservoirs
- Roads, external floors, canal linings
- Retaining waits, floorings Highways and rendering
- Roof decks and shell roofs
- Pre stressed beams and piers
Technical Data
Form: Liquid
Colour: Aluminised Silver
Method of use
RHEOCURE – RB has been designed to spray application to the newly laid concrete once the surface water has disappeared a thin film of RHEOCURE – RB is then applied to the whole surface using a hand operated spay gun or brush application Stir well before use. After application the area concerned must be protected from rain for at least 2-3 hours.
Storage
RHEOCURE – RB has a storage life of minimum 12 months in unopened container in dry condition out of direct sunlight.
Handling Precaution
RHEOCURE – RB is inflammable and usual precautions against fire and prolonged breathing of solvent vapour bust be deserved. Contact with the skin should be avoided.